Should You Install a Hot Water System Yourself?

Introduction to Hot Water System Installation

Having a reliable gas water heater is essential for any household, offering various types of systems, including gas, electric, solar, tankless, and heat pump models. Proper installation, covering requirements to supply gas hot water efficiently, by a professional plumber, is crucial for safety, efficiency, warranty preservation and adherence to your local building codes.

As a leading plumbing business serving Sydney, Jannali Plumbing specialises in installations where hot water systems can be optimally set up. Our experienced, licenced technicians can install your hot water system the right way, ensuring safety and the manufacturer’s warranty.

With expertise across all major configurations, we handle complete new installs, ensuring your hot water system can thrive, as well as replacements of existing ones. Rely on us for dependable hot water solutions tailored to your household’s requirements.

Evaluating DIY Feasibility and Understanding Professional Installation

Installation of a gas water heater requires compliance with local building codes, appropriate system sizing, type selection, and mitigating potential gas and electrical hazards. While attempting to install a gas electric water heater yourself may seem like a way to save money upfront, the complexity often leads to long-term issues if not set up properly.

In contrast, a full professional installation by our licenced technicians takes 6-8 hours. We guarantee strict adherence to regulations and best practices for safe, efficient operation of your hot water heater. Our expertise spans all water heater installation types and configurations to meet your needs and suit your house’s specifications.

As Sydney’s trusted hot water installation specialists, Jannali Plumbing offers reliable, compliant installs, ready for any future needs to repair your hot water amenities, for years to come. Get in touch to assess your needs and learn why professional installation is superior.

Safety Hazards and Avoiding Costly Mistakes

Installing your own water systems can expose you to serious safety hazards if not done properly. Gas line leaks, electric shocks, water damage and even explosions are risks associated with DIY water heater installation without proper electrical work expertise.

Homeowners may face issues like ponding water from improper water replacements, structural damage from leaks, and high gas bills due to inefficient installation. The high costs of rectifying DIY water heater issues often outweigh the initial savings.

As a licensed plumber, Jannali Plumbing’s professional installation includes:

• Thorough leak checks post-install
• Conducting very important pressure testing to expose any hidden leaks
• Thermal imaging to validate insulation and prevent heat loss
• Tuning to maximise efficiency

Utilising our expert installers ensures your hot water replacements are conducted safely and professionally. We adhere to all required regulations so your family can enjoy endless hot water for years to come.

Required Tools, Materials and Permits

To install water heater systems requires having the proper tools, materials and permits before starting. Here’s what to keep in mind at a minimum so your system can function properly:

• Pipe wrenches
• Adjustable wrench
• Hacksaw
• Tube cutter
• Teflon tape
• Flux brush
• Solder and torch
• Plumbing putty
• Emery cloth

Prepare all plumbing materials specific to your unit, including the tank, valves, fittings, pipes, and insulation, particularly for electric hot water heater installations.

From a legal perspective, installing new hot water heaters in NSW require approvals from local councils. As licenced technicians, Jannali Plumbing handles the permit application and approval process for you. We ensure complete adherence with Sydney Water regulations along with all relevant local council codes.

Choosing Jannali Plumbing guarantees a plumber who will install your water heater to the highest safety and compliance standards. We take care of all required permits and paperwork so your family can start enjoying endless hot water as soon as possible.

Step-by-Step Installation Guide

When our professional technicians from Jannali Plumbing handle your hot water system installation, We adhere to strict standards ensuring safety, efficiency, and compliance with building codes. Here is an overview of our type hot water system installation process:

1. We commence by safeguarding floors, clearing access paths, and ensuring the cold water supply and electricity are shut off in the work area.
2. Drain and disconnect, then replace your old water heater with a new hot water heater model.
3. We fit new mounting brackets, a drain pan, and stands for the replacement gas hot water system where necessary.
4. New hot water supply lines are connected to your unit for seamless integration with the plumbing system.
5. The unit’s hot water outlets are connected to the existing plumbing infrastructure.
6. Install discharge pipes connected to your new water heater to safely divert tp valve and drain outputs.
7. Connect gas and electric supply to power your new water heater system efficiently.
8. Insulate all water pipe connections.
9. Fill your water tank and check for leaks in the newly installed plumbing.
10. Verify proper water heating function and adjust temperature settings.
11. Complete administrative paperwork for permits and approvals.
12. Educate homeowners on general maintenance best practises.

Engage Jannali Plumbing for peace of mind, as we accurately and safely install water heaters within approximately 6 to 8 hours. Our skilled technicians ensure a smooth installation, correctly and safely executing the process within an estimated 6 to 8 hours.

Testing Functionality and Final Inspection

Thorough testing of the water system’s functionality is imperative upon completion. As licenced professionals, a rigorous final inspection is a key part of Jannali Plumbing’s natural gas installation service.

This involves carefully checking:

• All new plumbing connections for leaks
• Water heating performance and temperature settings
• Pressure relief valve discharge functionality
• Insulation coverage to prevent heat loss
• Gas fittings for correct pressure and leaks (for gas systems)
• Electrical wiring and circuit breaker capacity (for electric hot systems)

We also verify your hot water heaters’ proper drainage setup to safely divert discharge from the T&P valve and system drain. And confirm adherence to local building codes as well as manufacturer specifications.

Our final inspection provides total assurance your new hot water system is perfectly configured for efficient, safe functionality for years to come. As Sydney’s trusted installers, Jannali Plumbing’s expertise gives you peace of mind.

Maintenance Tips for System Longevity

To keep your hot water system operating efficiently for years to come, be sure to follow these key maintenance tips from the professionals at Jannali Plumbing:

1. Flush The Unit Annually

Regular flushing of the system removes sediment build-up, enhancing performance. Make sure to flush the system at least once a year.

2. Inspect Connections & Seals

Examine for signs your water heater may have compromised plumbing or seal integrity to avoid leaks. Tighten fittings or replace worn seals proactively if needed.

3. Test Pressure Relief Valve

Manually test the TPR valve to ensure it still functions properly. Replace it every 5 years.

4. Replace Anodes

Sacrificial anodes prevent tank corrosion but degrade over time. Have anodes inspected and replaced as required.

5. Insulate Pipes

Ensure pipe insulation is intact to optimise efficiency.

Arrange annual maintenance with our licensed technicians to maintain optimal performance of your hot water system. Contact Jannali Plumbing today on 1300 349 338 or email [email protected] to book your next maintenance appointment.